16
Your ECHO water pump is designed to provide many hours of trouble free service. Regular scheduled maintenance will
help your water pump achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want
to take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOUR-
SELF or have the ECHO Dealer do it, each maintenance task has been graded.
skIll levels
Level 1 = Easy to do. Most required tools come with unit.
Level 2 = Moderate difculty. Some specialized tools may be required.
ECHO offers REPOWER Maintenance Kits and Parts to make your maintenance job easier. Just below each task head-
ing are listed the various part numbers required for that task. See your ECHO dealer for these parts.
maInTenaCe InTervals
WARNING
Moving parts can amputate ngers or cause severe injuries. Keep hands, clothing and loose objects away from all
openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop
before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear
gloves to protect hands from sharp edges and hot surfaces.
maInTenanCe
COMPONENT/
SYSTEM
MAINTENANCE
PROCEDURE
REQ'D SKILL
LEVEL
DAILY OR
BEFORE USE
EVERY
REFUEL
3 MONTHS
OR 90
HOURS
YEARLY 600
HOURS
Air Filter Inspect/Clean 1
I / C *
Choke Shutter Inspect/Clean 1
I / C
Fuel Filter Inspect 1
I *
I / R *
Fuel Cap Gasket Inspect/Replace 1
I * R *
Fuel System Inspect/Replace 1
I * I *
Spark Plug Inspect/Clean 1
I / C / R *
Cooling System Inspect/Clean 2
I / C
Muffler Spark Arrestor Inspect/Clean/Replace 2
I / C / R *
Cylinder Exhaust Port Inspect/Clean/Decarbon 2
I / C
Recoil Starter Rope Inspect/Clean 1
I / C *
Screws/Nuts/Bolts Inspect/Tighten/Replace 1
I *
MAINTENANCE PROCEDURE LETTER CODES:
I = INSPECT, R = REPLACE, C = CLEAN
IMPORTANT NOTE
- Time intervals shown are maximum. Actual use and your experience will determine the frequency of
required maintenance.
MAINTENANCE PROCEDURE NOTES:
* Replacement is recommended based on the finding of damage or wear during inspection.