Dyson DC07 Vacuum Cleaner User Manual


 
Changing/fitting the belt Important safety instructions Important safety instructions
E Use back of cleaner as
lever, loop belt around
thumb. Turn the belt 90
degrees, stretch and
release over spindle.
Belt must be free of twists
as shown.
F Rest the three tabs on
inside of yellow bumper
strip and secure soleplate
back into position.
G Ensure soleplate is in
correct position before
use.
Optional: Upholstery tool
A Release catches and
remove the soleplate.
B Remove both brushbars
and clear away thread
and hair.
Changing/fitting the
belt
C To reassemble, match the
arrows on the brushbar to
the arrows on central
support.
D Align front of soleplate
with front of tool and
secure all 3 catches.
E Ensure slider is set as
shown.
CAUTION
•Ensure soleplate is in
correct position before
use.
E
Optional: maintaining the Upholstery tool
A
B D
C
E
13