Dyson DC 42 Vacuum Cleaner User Manual


 
9
LOOKING FOR BLOCKAGES
Switch ‘OFF’ and unplug before looking for blockages. Failure to do so could
result in personal injury.
Look for blockages in the wand, airways and cleaner head.
To remove the base plate to access an obstruction, see ‘Base plate –
disassembly/reassembly’.
To look for blockages in the airway between the ball and the cleaner head
you will need to remove the cleaner head: see ‘Base plate – disassembly/
reassembly’ below on how to do this.
Beware of sharp objects when checking for blockages.
Refit all parts securely before using.
Clearing blockages is not covered by your warranty.
CLEARING BLOCKAGES – THERMAL CUT-OUT
This appliance is fitted with an automatically resetting thermal cut-out.
Large items may block the tools or wand inlet. If any part becomes blocked the
appliance may overheat and automatically cut-out.
Switch ‘OFF’ and unplug. Leave to cool down for 1-2 hours before checking the
filters or for blockages.
Clear any blockage before restarting.
Clearing blockages is not covered by your warranty.
BRUSH BAR – CLEARING OBSTRUCTIONS
If your brush bar is obstructed, it may shut off. If this happens, you will need to
remove the blockage.
Switch ‘OFF’ and unplug before proceeding. Failure to do so could result in
personal injury.
Beware of sharp objects when clearing obstructions.
If you still cannot clear the obstruction, please follow the instructions below to
remove the base plate. This gives more access to the obstruction. Alternatively,
contact a Dyson expert on the Dyson Helpline or visit the website. Clearing
brush bar obstructions is not covered by your warranty.
BASE PLATE - DISASSEMBLY/REASSEMBLY
Switch ‘OFF’ and unplug before proceeding. Failure to do so could result in
personal injury.
Lie the appliance on its front.
Detach the red ‘C’ clip which is on the connection between the cleaner head
and the appliance. It is quite firm, but do not pull it off roughly. Use a constant,
firm pressure.
Pull the cleaner head away from the appliance. Use a constant, firm pressure.
At each end of the cleaner head are two levers:
– swing them out at right angles
– the base plate will disengage
– lift up the top edge, so it rotates to the upright position
– lift out.
Beware of sharp objects when clearing obstructions.
To refit the base plate:
– fit the 3 lugs on the lower edge of the base plate into the 3 slots in the base
of the cleaner head
– swing the upper edge of the base plate down; it will click into place.
To secure the base plate push both levers back into position so they are flush
with the surface of the cleaner head.
Refit the red ‘C ‘clip onto the cleaner head. The flatter edge of the clip fits
against the cleaner head. It is easier to slide one lug into its slot before the other.
Lie the appliance on its back.
Attach the cleaner head by sliding it on to the connections on the lower front
part of the ball. Ensure the electrical plug on the cleaner head fits into the
twin-block connection on the body of the appliance, which is directly above the
airway. Push firmly: the cleaner head will click into place.
BRUSH BAR – TROUBLESHOOTING
If the brush bar has stopped spinning, follow the instructions above on clearing
obstructions. Alternatively, contact a Dyson expert on the Dyson Helpline or visit
the website.
To watch a short online video visit:
www.english.dysoncanada.ca/DC42brushbarmaintenance
DISPOSAL INFORMATION
Dyson products are made from high grade recyclable materials. Please dispose
of this product responsibly and recycle where possible.
DYSON CUSTOMER CARE
THANK YOU FOR CHOOSING TO BUY A DYSON APPLIANCE
If you have a question about your Dyson appliance, please call the Dyson
Helpline with your serial number and details of where/when you bought the
appliance, or contact us via the Dyson website.
Most questions can be solved over the phone or by email with one of our Dyson
Helpline staff.
If your Dyson appliance needs service, call the Dyson Helpline so we can discuss
the available options. If your appliance is under warranty, and the repair is
covered, it will be repaired at no cost.
PLEASE REGISTER AS A DYSON APPLIANCE
OWNER
To help us ensure you receive prompt and efficient service, please register as a
Dyson appliance owner. There are three ways to do this:
Online at www.dysoncanada.ca
Telephone the Dyson Helpline at 1-877-397-6622.
Complete the enclosed Warranty Form and mail it to us.
This will confirm ownership of your Dyson appliance in the event of an insurance
loss, and enable us to contact you if necessary.
Your serial number can be found on your rating plate which is behind the
clearbin.
LIMITED 5 YEAR WARRANTY
TERMS AND CONDITIONS OF THE DYSON 5 YEAR LIMITED
WARRANTY.
WHAT IS COVERED
Your Dyson appliance is warranted against original defects in material and
workmanship for a period of 5 years from the date of purchase, when used for
private household purposes in accordance with the Dyson Operating Manual.
This warranty provides, at no extra cost to you, all labour and parts necessary to
place your appliance in proper operating condition during the warranty period.
This warranty is subject to the following terms:
WHAT IS NOT COVERED
Dyson Canada Limited shall not be liable for costs incurred as a result of:
Appliances purchased from an unauthorized dealer.
Accidental damage, faults caused by negligent use or care, misuse, neglect,
careless operation or handling of the appliance which is not in accordance with
the Dyson Operating Manual.
Use of the appliance other than for normal domestic purposes within the country
of purchase, e.g. for commercial or rental purposes.
Use of parts not in accordance with the Dyson Operating Manual.
Use of parts and accessories other than those produced or recommended by
Dyson Canada Limited.
External sources such as weather.
Repairs or alterations carried out by unauthorized parties or agents.
Blockages – please refer to the Dyson Operating Manual for details of how to
look for and clear blockages.
Normal wear and tear, including normal wearing parts such as belt, filter, brush
bar, hose assembly, and power cord (or where external damage or abuse is
diagnosed).
Carpet damage due to use not in accordance with flooring manufacturer’s
instructions or failure to turn the brush bar off when necessary.
WARRANTY SERVICE
Please fill out and return the Warranty Form, or register online at
www.dysoncanada.ca
Before service can take place, the terms of the warranty require that you contact
the Dyson Helpline with your model name/number, serial number, date and
place of purchase.
Please keep your purchase receipt in a safe place to ensure you have this
information.
All work will be carried out by Dyson Canada Limited or their authorized agents.
Any replaced defective parts will become property of Dyson Canada Limited.
Service under this warranty will not extend the period of this warranty.
If your appliance is not functioning properly, please call the Dyson Helpline.
Most issues can be rectified over the telephone by our trained Dyson Helpline
staff. If this is not possible Dyson Canada Limited will arrange for your
appliance to be repaired and returned in full working order at no extra cost
toyou.
WARRANTY LIMITATION AND EXCLUSIONS
Any representations, warranties or conditions relating to your appliance, express
or implied, statutory or otherwise, including but not limited to warranty of
merchantability or warranty of fitness for a particular purpose, are limited to
the duration of this warranty. This limitation is not allowed by some Provinces or
Territories and so this limitation may not apply to you.
Your remedy for breach of this warranty is limited to the warranty service
described above. Dyson Canada Limited will not be liable for any consequential
damages or incidental damages you may incur in connection with your purchase
and use of your appliance.
This warranty gives you specific legal rights. You may also have other rights
which vary by Province or Territory.
This warranty is not transferable.
This warranty is only available in Canada.
SUMMARY OF COVER
The warranty becomes effective at the date of purchase (or the date of delivery
if this is later).
You must provide proof of delivery/purchase before any work can be carried out
on your appliance. Without this proof, any work carried out will be chargeable.
Please keep your receipt or delivery note.
All work will be carried out by Dyson Canada Limited or its authorized agents.
Any parts which are replaced will become the property of Dyson
CanadaLimited.
The repair or replacement of your appliance under warranty will not extend the
period of warranty.
The warranty provides benefits which are additional to and do not affect your
statutory rights as a consumer.
IMPORTANT DATA PROTECTION INFORMATION
Your details will be held by Dyson Canada Limited or others on behalf of Dyson
Canada Limited so that we can assist you more quickly in our Dyson Helpline.
From time to time, Dyson Canada Limited may send you special offers and news
of our latest innovations.
For more information about our data collection practices, please refer to the
Dyson Canada Limited privacy policy at www.dysoncanada.ca
PRODUCT INFORMATION
Please note: Small details may vary from those shown.