Filter
Top Products
16
Finding blockages Important safety instructions Important safety instructions
B
A
C
D
Check tools are clear of
blockages.
A Release wand from
vacuum by pressing hose
button and sliding hose
off wand. Check inside
wand and hose for
blockages.
B Press hose release button
at front of machine and
slide hose out with lower
cord hook at rear.
U bend inspection
C Tilt machine forward, slide
out U bend and check
inside for blockages.
Airway inspection
D Squeeze valve release
buttons and check inside
for blockages.
CAUTION
•Turn power off and unplug
before checking for
blockages. Failure to do
so could result in electric
shock or personal injury.
•If any part of your
machine becomes
blocked, it may overheat
and then automatically
shut off. Unplug
machine and leave to
cool down.
Please note: Clearing
blockages is not covered
by your machine’s limited
warranty.
Beware of sharp objects
when clearing blockages.
Replace all parts of the
machine before using it.
If you hear a loud rachet
noise it means the
brushbar is obstructed.
Disconnect the machine
before removing the
obstruction.
Brushbar obstructions
Lie cleaner on its front.
Undo soleplate fasteners
using a coin and remove
soleplate.
Remove lint and hair from
brushbar.
Replace soleplate and
tighten fasteners.
Ensure soleplate is fitted
correctly when replacing.
Finding blockages
DC14 wand
A10480_DC14_USA_OWNER_MAN.q… p1 6/3/04 1:12 PM Page 11