Filter
Top Products
1 Release the catches.
2 Remove the soleplate.
3 Remove the brushbar and clear
away thread and hair.
4 Check the duct for blockages.
5 To re-assemble, align the
arrows on each brushbar in the
same direction, click and fasten
the soleplate into place.
Clean air turbine head
1 Release the catches.
2 Remove the soleplate.
3 Remove the brushbar and clear
away thread and hair.
4 Check the duct for blockages.
5 To re-assemble, align the
arrows on each brushbar in the
same direction, click and fasten
the soleplate into place.
Mini turbine head
1
3
Blockages
Dyson Helpline contact us on
1
-
866
-
693
-
9766
14
Press catch 1 to release cyclone pack. Check whether the filter and case
need washing. Check the air inlets.
1
2
5
1
3
2
4
5
4
11323_DC11_USA_OWNER_MAN.qxd p1 9/23/04 2:43 PM Page 14