Duracraft DWM-250 Humidifier User Manual


 
SETUP
• Remove the water tank by grasping the handle and pulling
straight up. Set aside (Fig. 1).
• Turn the Water Tank upside down so that the Fill Cap is fac-
ing up; unscrew the Fill Cap by turning it counter-clockwise
and set aside.
Fill the Water Tank with COOL tap water (Fig. 2). Distilled
water is not necessary as the water is purified by the heating
element.
DO NOT USE HOT WATER. Doing so may damage
the humidifier.
Replace the fill cap by turning it clockwise .
DO NOT OVER TIGHTEN.
NOTE: WHEN CARRYING THE FILLED WATER TANK,
PLEASE USE THE HANDLE AND PLACE YOUR OTHER
HAND UNDER THE TANK FOR ADDITIONAL SUP-
PORT.
Turn the Water Tank right side up. Position the tank into the
humidifier and push it into place (Fig. 3).
Some water will flow into the Removable Tray when the filled
tank is properly in place.
Once the filled tank has been positioned, do not attempt to
move the humidifier. If it has to be moved, unplug the humidifi-
er and remove the water tank first.
CAUTION: DO NOT POUR WATER INTO THE GRILLE
ON TOP OF THE HUMIDIFIER (Fig. 3). DOING SO
MAY DAMAGE THE HUMIDIFIER OR CAUSE PER-
SONAL INJURY.
NOTE: We recommend that the humidifier be disinfected prior to first
use. Please see WEEKLY CLEANING instructions.
• Select a firm, level, flat location - at least six inches (15 cm) from any wall for proper
air flow (Fig. 1). Place the humidifier on a water-resistant surface, as water can dam-
age furniture and some flooring.
Kaz will not accept responsibility for property damage caused by water spillage.
Fig. 1
Fig. 2
Fig. 3
WALL
6"
FILLING
DWM-250_OM_2006.qxd 6/5/06 4:40 PM Page 4