Filter
Top Products
36
Intensity
Draft Setting
Low Move Control against the L.H. side.
Medium Low Move Control right by 9/16” – 1” (14.3 – 25.4mm) from low position.
Medium High Move Control right by 7/8” - 1 3/4” (22.2 – 44.5mm) from low position
High Move Control against the R.H. side
Table 3.4
Closing the draft control down too soon will lower combustion efficiency, and may result in
creosote build-up in the chimney (which could lead to a future chimney fire).
CAUTION: THE ADJUSTMENT RANGE SHOULD NOT BE ALTERED FOR INCREASED FIRING FOR ANY REASON.
DAMPER OPERATION
CLOSED
OPENED
Figure 3.4