Drive Medical Design TK 3000 Pet Fence User Manual


  Open as PDF
of 6
 
accessories
Most accessories are mounted with the universal mount-
ing bracket. To install the mounting bracket, loosen knob
(G) on clamp and lower it. Lift clamp and place over
handlebar. Bring knob up and tighten. The mounting
bracket can be placed anywhere on the handlebar and it
will depend on the user’s abilities. It can also be mounted
towards the outside or the inside of the handlebar.
Forearm Platforms
Item #s TK 1035 S & TK 1035 L
Install mounting bracket and post at appropriate location.
Place forearm platform on mounting bracket post by loos-
ening knob (H) and placing forearm platform at desired
position.
Forearm platform adjustments
Height – Push in button (I) and slide post to desired posi-
tion. Release button and move forearm platform until it
clicks into place.
Width – Forearm platforms can be placed closer or far-
ther from the user by
• Looseningknob(H)andslidingtheforearmplatform
outward or inward.
• Placemountingbracketwiththeclampfacingtowards
the outside or inside of the handlebar.
• Positionforearmplatformposts(J)facingtowardsthe
outside or inside of the handlebar.
Rotation – Loosen knob (H) to rotate up or down and in
or out. It can rotate 360°.
Depth – Loosen knob (H) and slide arm pad forward or
backward or reposition mounting bracket.
• Looseningknob(K)allowsthehandgripstoextend
forward and backward, supinate and pronate.
• Looseningknob(L)allowswristangleadjustability.
• Armstrap(M)andwriststrap(N)securesarm.
Handgrips
Item # TK 1045
Install mounting brackets at appropriate location on the
handlebar. They can be mounted with the clamp facing
towardstheoutsideorinsideofthehandlebar.Toadjust
the height, push in button (I) and slide post to desired
position. Release button and move handgrip until it clicks
into place. Handgrips can rotate in four directions.
K
M
N
G
I
J
HL
G
 previous next