Filter
Top Products
SMS Flatscreen Mounts for LCD-TFT Flat Panel Displays by Draper
Page 2 of 4
www.draperinc.com
(765) 987-799
9
Specifi cations—SMS Flatscreen Mounts for Flat Panel
Displays
SMS Flatscreen Mounts for Flat Panel
Displays, model (WL 3D/WMT/WLF/WL ST/CL VST [CL VST300-350/CL
VST500-750/CL VST650-900/CL VST850-1100/CL VST1050-1300]), by
Draper, Inc., of Spiceland, Indiana.
Universal mounting bracket shall be provided to match LCD-TFT Flat
Panel Displays with VESA
®
75 mm and 100 mm mounting hole spacing.
Bracket slides into steel mating bracket on wall supports for easy, safe
and sturdy mounting. Bracket shall be compatible with all Draper wall and
ceiling supports and shall lock in place using a security screw. Hardware
for mounting bracket to Flat Panel Display provided by Draper; hardware for
attaching mount to wall supplied by others.
WL 3D: Wall bracket shall be of steel, with silver fi nish. Articulating wall
mount collapses to depth of 3
3
/
8
" (minus fl at panel display and bracket). The
articulating arm extends the display up to 15" from wall, and allows swivel left
and right as far as the wall will allow. Maximum weight capacity 22 lbs.
WMT: Universal wall mount shall be of steel, with silver fi nish, and shall be
compatible with VESA mounting confi gurations 75/75, 100/100, 200/100 and
200/200, and other VESA and non-VESA confi gurations up to 13" w x 9
5
/
8
" h.
Puts back of screen less than 2" from wall. 10° forward tilt. For LCD-TFT Flat
Panel Displays from 20"-32" diagonal, but will work with smaller displays as
well. Flange screws lock bottom edge of bracket in position. Maximum weight
capacity 66 lbs.
WLF: Wall bracket shall be of steel, with silver fi nish. The bracket is stationary,
and cannot be tilted or angled. The back of the screen shall be located
5
/
8
"
from the wall. Maximum weight capacity 26 lbs.
WL ST: Wall bracket shall be of steel, with a silver fi nish. 15° tilt up and down;
20° left to right. The back of the screen shall be located 2
1
/
8
" from the wall.
Maximum weight capacity 26 lbs.
CL VST: Select (CL VST300-350/CL VST500-750/CL VST650-900/CL
VST850-1100/CL VST1050-1300). Two-piece telescoping column shall be
of extruded aluminum, with anodized aluminum fi nish. Outer column shall
securely attach to ceiling with heavy steel ceiling plate (provided). Installer
shall provide mounting hardware appropriate to ceiling conditions. Outer
column shall have + 20° tilt and 360° rotation at the ceiling bracket. Outer
column shall have two built-in self-concealing cable races with molded press
fi t covers. Inner column shall have infi nite height adjustability within range
according to column size. Mount shall have up to 35° tilt and 360° rotation at
lower bracket. Maximum load 33 lbs.
Options:
L Adapter: Adapter mounting plate for fl at panel display that will attach to any
SMS Plasma Display Mount. Fits any LCD-TFT Flat Panel Display with VESA
®
75 mm and 100 mm mounting hole patterns. Maximum weight capacity 33 lbs.
Escutcheon Ring: Black ring shall trim and cover ceiling opening around
SMS CL VST. Designed to fi t larger portion of column. Shall include adhesive
tabs for attaching to ceiling tile.
Escutcheon Clips: Black clips shall snap onto smaller, adjustable portion of
column to cover ceiling opening around Mount.
About Draper’s VESA
®
Mounting Plate
All Draper SMS Mounts for LCD-TFT Flat Panel Displays feature
our VESA
®
mounting plate, which fi ts any fl at panel display with
mounting holes spaced 75 mm and 100 mm apart.
Specifi cations—SMS Flatscreen Column Mounts for Flat
Panel Displays
SMS Flatscreen Mounts for Flat Panel
Displays, model (CL ST800/WL ST800/WL ST1200/TL ST400), by Draper,
Inc., of Spiceland, Indiana.
Universal mounting bracket shall be provided to match LCD-TFT Flat
Panel Displays with VESA
®
75 mm and 100 mm mounting hole spacing.
Bracket slides into steel mating bracket on wall supports for easy, safe
and sturdy mounting. Bracket shall be compatible with all Draper wall and
ceiling supports and shall lock in place using a security screw. Hardware
for mounting bracket to Flat Panel Display provided by Draper; hardware for
attaching mount to wall supplied by others.
Column shall be of extruded aluminum, with anodized aluminum fi nish.
Installer shall provide mounting hardware appropriate to ceiling, wall or table
conditions. Column shall have built-in rubber strip to conceal cables. LST
shall be infi nitely adjustable up and down length of column. Display shall
attach to LST using universal mounting plate with 75mm and 100 mm hole
spacing (VESA
®
standards). Mount shall have up to +/-25° tilt and +/-90°
rotation.
CL ST800: Column shall securely attach to ceiling with steel ceiling plate
(provided). Installer shall provide mounting hardware appropriate to ceiling
conditions. Maximum load of each multi-panel bracket is 22 lbs; maximum
load for column is 88 lbs.
WL ST800: Column shall securely attach to wall with steel wall plates
(provided) and wall plates with mounting studs (provided). Installer shall
provide mounting hardware appropriate to wall conditions. Maximum load of
each LST is 22 lbs; maximum load for column is 88 lbs.
WL ST1200: Same as WL ST800, but with a longer column.
TL ST400: Column shall securely attach to table or other surface with
steel mounting plate (provided). Installer shall provide mounting hardware
appropriate to surface. Maximum load of each LST is 22 lbs.
Options:
3D Arm L: Extending arm that attaches to column on any of the above
mounts. Extends display up to 14¾" out from column. Maximum weight
capacity of 3D Arm L is 18 lbs.
Clamp: Clamp assembly attaches to bottom of column to allow temporary
attachment to tables or counters up to 1
1
/
8
" thick or pipe up to 1½" diameter.
Shelf M/L: Adjustable shelf holds up to 22 lbs. Available in black.