Filter
Top Products
ENGLISH
Volvo L-4 Installation Guidelines
10
Install the grill from the inside of the duct with the
vanes pointing upward. Use two cable ties to secure
the vanes so they will not turn.
Drill holes in the duct transition, and pop rivet into
place using the supplied rivets and brass washers
(Figs. 15a-15b).
Push the duct and grill back into the hole in the
Volvo duct. Attach the 4" duct with a hose clamp.
Push the duct over the grill until it is tight against the
transition, and then tighten the clamp (Fig. 16).
Figure 15a - V4 RND black installed in the duct transition
Figure 15b - V4 RND black installed in the duct transition
Figure 16 - Duct transition reinstalled