Filter
Top Products
7
VACUFLUSH MAINTENANCE KIT
The VacuFlush Maintenance Kit contains re-
placement parts used in routine maintenance of
VacuFlush toilets. A “must” for those who cruise
to remote locations. The kit includes vacuum
tester, water valve, seal kit, duckbill valves (4)
and an owner’s manual in a convenient storage
container.
ORDERING PARTS
Dometic is ready to assist you in the event service is required. Before calling, please have the following infor-
mation available. Your cooperation in having this information ready is appreciated and allows us to better meet
your needs. Please refer to the Parts Distributor list on Page 15.
1. Toilet Model Number (See following section.)
2. Serial Number
3. Part Number, Description and Quantity (See Parts information.)
TOILET MODEL IDENTIFICATION
The above label is located on the toilet base and will show the model number and serial number. If label is not
available, please refer to the Dimensional Specifications section for toilet model identification.
PEDESTAL AND PEDAL COVER INSTALLATION
1. With the pedestal cover open, place the back half
against the side of the base opposite the flush lever.
Rotate the pedestal cover counterclockwise around the
back of the base, then move the front half into place.
2. Tall base unit only, secure with mounting screw.
For short base units, simply snap cover closed.
3. Slide pedal cover onto foot pedal rod.
4. Attach pedal cover side plate and secure with
two (2) mounting screws. For short base units,
secure front screw, then press foot pedal down
completely to secure second screw.
1
3
4
2
VacuFlush
Maintenance Kit
(item number 310228)
DOMETIC CORPORATION
P.O. BOX 38, 13128 STATE RT 226 (800) 321-9886
BIG PRAIRIE, OH 44611 USA
MODEL NO. 000
SERIAL NUMBER
000000