Filter
Top Products
6
❖❖
❖❖
❖
English
L-2245
Carry-On 7000 Portable Air Conditioners • Installation
Figure 1. The Carry-On positioned in the boat hatch with the
Hatch Bag in place. See inset Figure 2.
3a. Proper Positioning In Hatch
3b. Improper Positioning In Hatch
Figures 3a & 3b. These figures show
proper and improper positioning and
leveling of the Carry-On unit in the
boat hatch. It is very important that
the Carry-On be level.
Figure 2. Close-up of Batten and Batten Pockets
Alternate
Batten Pocket
Batten Pocket
Batten
1. Place in open hatch as shown. (See
Figure 5.) Adjust Carry-On so that the
hatch pad protects and insulates the
hatch and the Carry-On unit. Make sure
that movement of Carry-On is stifled due
to wedging action of the hatch pad as it
presses against hatch edge.
NOTE: Carry-On may be further secured
using the D-ring type "tie downs".
2. Place hatch bag over Carry-On in
grooves provided. Do not allow hatch bag
to cover air intake vents or condensate
drain. (See Fig. 1.)
3. Adjust the hatch bag over the hatch
cover and hatch opening. The hatch bag
is designed to keep outside air from
entering the hatch while the Carry-On is in
use. The fit should be as snug as possible.
Use the battens provided to form the
deckframe. Slide the battens into the
pockets provided. Note that there is an
alternative set of batten pockets for use
with a smaller hatch. Should you decide to