Filter
Top Products
19
User Code Change Event Displays
This displays any addition, deletion, or change to a user code.
Display Description
JONES RESIDENCE User 9 added user 12 to the system.
9 ADD 12
Code Event Types - There are 3 event type you may see here:
ADD - User added DEL - User deleted
CHG - User code or authority level has been changed
The user number added, deleted, or changed is on the left. The user
number of the person making the change is on the right.
System Monitor Event Displays
This displays any loss of the system's AC power or battery.
Display Description
JONES RESIDENCE An AC failure occurred on the system.
POWER TROUBLE Press the
right
Select key for the time.
System Monitor Event Types - There are 2 event types:
TROUBLE RESTORE
System Monitor Event Names - There are 2 system monitors:
POWER - Problem with the AC power to the panel
BATTERY - Problem with a low battery. This could be due to the
battery exceeding its life expectancy. Call the service department
whenever you see a BATTERY TROUBLE display.
User Checkin Event Displays
This shows when a user selected the pager CHECKIN feature from
the User Menu. See page 11 for more information.
Display Description
JONES RESIDENCE User 11 selected the CHECKIN feature
CHECKIN 1 1 in the system's User Menu.
Request for Service
User Code Level: Master or Standard.
Function: Allows you to send a Request for Service request to the
central station when there is a problem on your system.
After the Display Events function in the keypad's User Menu, you'll
see the SERVICE REQUEST? display if it has been programmed for
your system. If this feature has been programmed, and you would like
to send a Request for Service report to the central station, press any
top row SELECT key while SERVICE REQUEST? is displayed. After
the Request for Service report has been sent, the keypad displays
REQUEST MADE for about four seconds. A service representative
will then call you and arrange for a service technician to be dispatched.
It there is a problem with the telephone line connected to the system,
you must contact our service department directly for assistance.
User Menu