Filter
Top Products
17
Maintenance
Figure 12
Light
Block
⑥ Replace with new bulbs.
⑦ Reassemble light block and
glass assembly in reverse order.
Glass Cleaning
The front glass is cleaned in the
factory during the assembly
operation. During shipment,
installation, handling, etc., the
front glass may collect dust
particles, these can be removed
by dusting lightly with a clean dry
cloth.
To remove ngerprints or other
marks, the glass can be cleaned
with a damp cloth. The glass
should be completely dried with
a lint free cloth to prevent water
spots. To prevent scratching,
do not use abrasive cleaners or
spray liquids on the glass surface.
Fireplace Surface
Cleaning
To remove ngerprints or other
marks, the exterior nish can be
cleaned with a damp cloth with
a mild detergent. The surface
should be completely dried with
a lint free cloth to prevent water
spots.
To prevent scratching, do not use
abrasive cleaners or spray liquids
on any surface.