Filter
Top Products
10 www.dimplex.com
⑦ With the glass assembly
taken off, mount the rebox onto
the two (2) mounting screws.
⑧ Mark position of hole “H”.
⑨ Remove replace from wall.
⑩ Install drywall anchor into
drywall at marked position.
⑪ With the glass assembly off,
mount the replace onto the two
(2) mounted screws.
⑫ Tighten both mounting screws
with a screwdriver. Be careful not
to over tighten the screws mated
Fireplace Installation
with the drywall anchor.
⑬ Secure Philip’s screw into
drywall anchor, already in the
wall.
⑭ Open bag of black pebbles
and gently pour through top
opening of front glass assembly.
⑮ Install glass assembly as
shown in Figure 4.
Built-In Instructions
WARNING: The installation of
the replace unit must comply
with the applicable local and/or
national electrical codes and
utility requirements. This
Ensure Glass
Assembly
brackets engage
hooks on replace
by sliding Glass
Assembly towards
replace and then
down
Secure Glass
Assembly with the
four (4) supplied
self-tapping screws
Figure 4