Filter
Top Products
674
364
188
229
663
The product complies with the European Safety Standards BS EN60079 and the European Standard Electromagnetic Compatibility (EMC)
EN55014, EN60555-2 and EN60555-3 which cover the essential requirements of EEC Directives 73/23 and 89/336
Thermal Safety Cut-out
The thermal cut-out will operate and the power supply to the heating
element will be interrupted if ventilation of the heater is impaired.
Before resetting the thermal cut-out, the cause of the impaired ventilation
should be established and eliminated.
Procedure for resetting cut-out
1. Disconnect power supply.
2. Remove the guard.
3. Remove the terminal cover to access the thermal cut-out - see Fig. 2.
4. Press the reset tab located in the centre of the cut-out (cut-out clicks
when reset) - see ‘x’ in Fig. 2.
5. Re-fit the terminal cover and reconnect power supply.
6. Re-fit the guard.
If the cut-out continues to operate intermittently, the heater should be
switched off and a service agent contacted.
Fig. 4
Cleaning and User Maintenance
WARNING: DISCONNECT SUPPLY before carrying out maintenance.
The heater should be subject to a regular maintenance schedule with the
following actions as a minimum:
· Check that the heater surfaces are clean and free from any deposits.
The heater can be cleaned by wiping with a damp cloth. Neither
abrasive cleaning powders nor furniture polish should be used.
· The internal wiring shall be clean and dry, with no apparent
deterioration of the wiring insulation.
· All connections shall be tight, without signs of overheating.
Recycling
For electrical products sold within the European Community.
At the end of the electrical products useful life it should not
be disposed of with household waste.
Please recycle where facilities exist. Check with your Local
Authority or retailer for recycling advice in your country.
After Sales Service
Your product is guaranteed for one year from the date of purchase.
Within this period, we undertake to repair or exchange this product free
of charge (excluding element & subject to availability) provided it has
been installed and operated in accordance with these instructions. Your
rights under this guarantee are additional to your statutory rights, which
in turn are not affected by this guarantee.
Should you require after sales service you should contact our customer
services help desk on 0845 600 5111 It would assist us if you can quote
the model number, series, date of purchase, and nature of the fault at the
time of your call. The customer services help desk will also be able to
advise you
should you need to purchase any spares.
Please do not return a faulty product to us in the first instance as this
may result in loss or damage and delay in providing you with a satisfactory
service. Please retain your receipt as proof of purchase.
Dimplex UK Ltd.
Millbrook House
Grange Drive
Hedge End
Southampton
Hampshire. SO30 2DF
[c] Dimplex UK Limited
All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Dimplex UK Limited.
UK customer help line 8.00am–5.00pm Mon-Fri and 8:30am-1.00pm Sat (October-March)
Technical Services: Tel. 0845 600 5111
Fax. 01489 773053
e-mail technical.services@dimplex.co.uk
Republic of Ireland Tel. 01 8424833