Dimplex EF3003 Indoor Fireplace User Manual


 
EF3003, SF3003, DF3003
TROUBLESHOOTING GUIDE
GENERAL
Problem Cause Solution
Service Manual
Reference
Circuit breaker trips
or fuse blows when
unit is turned on
Improper circuit current rating
Additional appliances may
exceed the current rating of
the circuit breaker or fuse.
Plug unit into another outlet
or install unit on a dedicated
15 amp circuit
Remote control has a similar
frequency to other remotes in
the area
Unit turns on or off
by itself
Radio frequency disturbance
from outside sources
Select alternative frequency
code
Page 2
Lights dim in room
while the unit is on
Unit is drawing close to circuit
current rating
Move the unit to another
outlet or install unit on a
dedicated 15 amp circuit
Normal operation
The power cord may get
slightly warm to the touch
when the heater is on
Power cord gets
warm
Defective power cord Replace power cord Page 20
APPEARANCE
Problem Cause Solution
Service Manual
Reference
Improper operation Refer to User’s Guide
Defective main on/off switch Replace main on/off switch Page 12
Defective remote control
Install new batteries into the
handheld transmitter /
reinitialize
Page 1
Fireplace does not
turn on
Loose wiring Check wiring connections Page 9
Defective flame motor Replace flame motor Page 15
Flame frozen
Loose wiring Check wiring connections Page 9
Burnt light bulbs Replace light bulbs Page 10
Loose wiring Check wiring connections Page 9
Flame not bright or
flame not visible
Defective light harness Replace light harness
Log set dim, ember
bed not glowing
Burnt light bulbs Replace light bulbs Page 10
Flame Shutter Defective flame motor Replace flame motor Page 15