Filter
Top Products
9
Maintenance
WARNING
Disconnect the power before attempting any maintenance or
cleaning to reduce the risk of fire, electric shock or damage
to persons.
Light Bulb Replacement
Allow at least 5 minutes for the light bulbs to cool before
touching them to avoid accidental burning of the skin. The
light bulbs need to be replaced when you notice a dark
section of the flame or when the clarity and detail of the log
ember bed exterior reduces. There are three bulbs under the
log set, which generate the flames and embers, and two
bulbs above the log that illuminate the log exterior.
Lower Light Bulb Requirements
Quantity of 3 clear chandelier or candelabra bulbs with an E-
12 (small) socket base, 60 watt rating. Example: GE 60BC
or Philips 60 CTC.
DO NOT EXCEED 60 WATTS PER BULB
Helpful Hints
It is a good idea to replace all light bulbs at one time if they
are close to the end of their rated life. Group replacement will
reduce the number of times you need to open the unit to
replace light bulbs. Care must be taken when removing the
logset as the logset contains LED’s and wires.
Lower
Bulbs
Upper
Bulbs
Trim
Front
Glass
Logset