Filter
Top Products
(4) After 2 minutes, the air curtain will return to a dormant state
until the door is re-opened. If the door re-opens during this 2
minute run on cycle, the process will re-start at (1).
Wiring Diagrams
CAB & DAB ‘E’ - Electric models - see Fig. 7
CAB & DAB ‘W’ / ‘A’ - Water heated & Ambient models - see Fig. 8
C - Thermostat
D - Door Switch (Optional)
E - Thermal Safety Cut-out Circuit
F - Elements
- BMS Switches (Optional)(S,S1,S2)
M - Motor
Remote (BMS / BEMS) Operation
Connection to Building Energy Management Control Systems
(BEMS) is possible so that remote control of the air curtain can be
carried out in conjunction with other equipment. Please refer to
the table in Fig. 7 & 8 to make the appropriate connections to the
PCB.
Modular Connection
Refer to instructions provided with the modular linking kit.
Recessed Installation
Refer to instructions provided with the recess installation kit.
De-rating the unit to operate at 1/2 heat setting
Please contact your sales or service agent using the contact details
provided.
Operation on a Single Phase Supply
Please contact your sales or service agent using the contact details
provided.