Filter
Top Products
HEATER CONTROL
SWITCH
OPERATION
The controls for the Electric Fireplace are located at the bottom right hand corner of the unit.
MANUAL CONTROLS
A. Main Power Switch
Main on/off switch, activates the flame effect
B. Heater Control Switch
Heater ON/OFF switch, activates the heater
C. Fan Control Switch
Fan ON/OFF switch, activates the fan (purifier).
WALL MOUNTED CONTROLS
The fireplace can be installed with wall mounted controls. These controls include wall switches
and thermostats. (see installation guide for details)
A. Wall Mounted Switches
This model may be installed such that a wall mounted switch activates the flame effect and
a wall mounted heater switch activates the heater (fan control switch on unit must be set at
ON position). A wall mounted switch can also be installed to operate the heater
independent of the flame. Fan control cannot be wired to a wall mounted switch.
B. Wall Mounted Thermostat
This unit may be installed such that a wall mounted thermostat can adjust the heat
temperature to your individual requirements. Turn the thermostat control clockwise all the
way to turn on the heater. When the room reaches the desired temperature, turn the
thermostat knob counter clockwise until you hear a click. Leave in this position to maintain
MAIN POWER
SWITCH
MANUAL CONTROLS
FIGURE 1
FIGURE 2
FAN CONTROL
SWITCH
4
OVERHEAT INDICATOR