Filter
Top Products
www.desatech.com
114745-01B 27
WALL-MOUNT THERMOSTAT
SWITCH - GWMT1
(Not Shown)
For all models. The desired comfort setting can
be selected on the wall thermostat and the log
heater will automatically cycle from pilot to the
heat setting selected.
WALL-MOUNT ON/OFF SWITCH
GWMS2 (Not Shown)
For all models. Allows the gas log heater to be
turned on and off with a wall switch.
VENT-FREE LOGMATE
®
FIREBOXES
(Not Shown)
Available in 32", 36" and 42" models. Circu-
lating fireboxes feature louvers and an optional
blower. Non-circulating, smooth face models are
ideal for custom trim applications such as stone
or marble.
FB32C (CIRCULATING), FB32NC
(NON-CIRCULATING) SERIES
(Not Shown)
For all models.
RECEIVER AND HAND-HELD
THERMOSTAT REMOTE CONTROL
KIT - GHRCTB
For all models. Allows the gas log heater to be oper-
ated in a manually or thermostatically controlled mode.
You can turn the gas log heater on and off without ever
leaving the comfort of your easy chair.
RECEIVER AND HAND-HELD
REMOTE CONTROL KIT - GHRCB
For all models. Allows the gas log heater to be
turned on and off by using a hand-held remote
control.
ACCESSORIES
Continued
FB36CA, FB42C SERIES
(CIRCULATING), FB36NCA, FB42NC
SERIES (NON-CIRCULATING)
(Not Shown)
For all models.
DAMPER CLAMP - GA6080
(Not Shown)
For all models. Permanently opens chimney flue
damper for vented operation.
LAVA ROCK - GA6060
(Not Shown)
For all models. Order when additional rock is
desired. (1.8 lb. bag)
CLEANING KIT - GCK
(Not Shown)
For all models. Your vent-free gas appliance re-
quires regular cleaning and maintenance to prevent
performance problems. This kit gives you the tools
and instructions to make it easy to clean all critical
areas of your appliance.
INFORMATION VIDEO - 108917-01
For all models. A care and maintenance video is
available by calling 1-866-672-6040.
FLOOR MEDIA KIT - FM100
For all models. This kit is used to blend the edge of
the burner to the fireplace floor for a more natural
appearance. It includes embers, lava rock and nine
fiber log pieces.
CONTROL COVER MEDIA KIT
CC100
For all models. This kit is used as an addition
to or instead of the Floor Media Kit FM100. It
includes 6 fiber log chunks to be placed on the
fireplace floor in front of the controls for a more
natural appearance.