Filter
Top Products
10
102748
Upper
Shell
Fan
Guard
Figure 9 - Fuel Filter Removal, 8,8/20,5 kW (30/70,000 Btu/Hr) Models
Figure 7 - Upper Shell
Removal, 8,8/20,5 kW
(30/70,000 Btu/Hr) Models
Figure 8 - Upper Shell
Removal, 26,4/44 kW
(90/150,000 Btu/Hr) Model
Upper
Shell
Fuel Filter
(8,8/20,5 kW [30/70,000 Btu/Hr]
Models)
1. Remove side cover screws
using 5/16" nut-driver.
2. Remove side cover.
3. Pull rubber fuel line off
fuel filter neck.
4. Carefully pry bushing and
fuel filter out of fuel tank.
5. Wash fuel filter with clean
fuel and replace in tank.
6. Attach rubber fuel line to
fuel filter neck.
7. Replace side cover.
SERVICE
PROCEDURES
Upper Shell Removal
1. Remove screws along each
side of heater using 5/16"
nut-driver. These screws
attach upper and lower
shells together.
2. Lift upper shell off.
3. Remove fan guard.
WARNING ICON G001
WARNING
Never service heater while it is plugged in, operating, or
hot. Severe burns and electrical shock can occur.
Fan
Guard
Fuel Filter
Side Cover
Fuel Line
Fuel Filter
(26,4/44 kW [90/150,000 Btu/Hr]
Models)
1. Remove side cover screws
using 5/16" nut-driver.
2. Remove side cover.
3. Pull upper fuel line off fuel
filter neck.
4. Carefully pry bushing,
lower fuel line, and fuel
filter out of fuel tank.
5. Wash fuel filter with clean
fuel and replace in tank.
6. Attach upper fuel line to
fuel filter neck.
7. Replace side cover.
Upper
Fuel Line
Side Cover
Fuel Filter, Bushing,
and Lower Fuel Line
Figure 10 - Fuel Filter Removal, 26,4/44 kW (90/150,000 Btu/Hr) Models