Filter
Top Products
3
How To Operate
Before using for the first time, clean the appliance with a
damp cloth and dry thoroughly.
1. Plug in the power cord.
2. Press the ON/OFF button once to put the Halogen
Burner in stand-by mode. The first indicator light will
begin to flash. NOTE: If the appliance is not started
within 20 seconds it will automatically turn off.
3. Press the +/- buttons to increase/decrease the
temperature. NOTE: There are 6 different heating
levels.
4. During operation the temperature of the Halogen
Burner can be increased/decreased by using the
+/- buttons.
5. Press the ON/OFF button to turn the unit off after you
are finished cooking.
6. Keep the unit plugged in for at least 15 minutes after
use. This allows the ventilator to cool the hot plate
quicker. NOTE: After the unit has been turned off, the
CAUTION light will continue to blink, indicating that
the hot plate is still hot.
How To Clean
Appliance
1. Turn the unit OFF and unplug from outlet.
2. Allow the Halogen Burner to cool completely before
attempting to clean.
3. Do not immerse the appliance in water. Clean with a
damp cloth.
Cooking Plate
1. Burned food can be scraped off while the cooking plate
is still hot.
2. To remove food stains, apply a ceramic glass cleaner to
the slightly warm surface of the cooking plate and gently
rub with a soft cloth or sponge.
3. If sugary foods get spilled on the cooking plate, clean
immediately, to avoid chemical reactions with the
halogen heating element.
4. Brown stains that appear on the surface of the cooking
plate should be cleaned immediately with a ceramic
glass cleaner. These stains occur because of spilled water
or mist on the pans.
5. Do not use plastic utensils to clean the hot cooking
surface, they will melt and stick to the cooking plate.
NOTE: If this should happen, scrape the plastic off and
clean immediately while the cooking plate is still hot.