HOW TO USE YOUR HEATER
“EASY WHEEL”SYSTEM
Turn the radiator upside-down on a rug or a soft surface in order to prevent damaging the paint finish. Fully
unfold the castors by turning them outwards (Fig. 1).
Turn the radiator back to its upright position.
CAUTION
Always operate the heater in upright position only (wheels on the bottom, controls on top). Any other position
could create
1. LOCATION
Place heater on the floor beneath the coldest window in the room, or any other location. Your heater will
reduce the effect of cold drafts. The heater should not be placed immediately below a power outlet.
Do not use this radiator in rooms with a floor area of less than 43 square feet (4 sq. m.).
2. CONNECTION
The radiator should be connected to a properly polarized A/C 110/120 V household outlet in perfect working
condition. Keep loose clothing or bedding, furniture and flammable material away from the heater’s wall
outlet.
located is well ventilated during this operation. It is normal for the appliance to emit small
cracking sounds when you turn it on for the first time.
23. Do not cover the appliance while it is functioning in order to avoid overheating with the attendant risk of
fire.
24. This heater is not intended for use with an extension cord or outlet strip. Plug the cord directly into an
appropriate wall outlet.
25. CAUTION: to prevent electric shock match wide blade of plug to wide slot, then fully insert.
SAVE THESE INSTRUCTIONS
For Household use only
3
With pilot lights ON, the heater is ON!
WATTS ECONOMIZER
For more economical use, the Min. or Med. Watt switches may be
used individually, after unit has reached the operating tempera-
ture.
fig. 1