Filter
Top Products
5
ATTENTION
A safety device switches the fan heater off if it accidentally
overheats. To reset the unit for normal operation, remove the
plug from the outlet for a few minutes, eliminate the cause of
overheating (e.g. air intake or outlet grilles obstructed) and
then plug the fan heater back in again. Contact your nearest
Service Center if the fan heater does not begin normal opera-
tion again.
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
The appliance doesn’t work
• Be sure it is plugged in and that the
electrical outlet is working.
• Check for any obstruction.
• The function selector is in the ”0” posi-
tion.
• The thermostat may be set too low.
• Plug into the outlet.
• Remove the obstruction, unplug the hea-
ter and let the appliance cool down. If
the appliance doesn’t work please con-
tact the nearest service center.
• Turn the function selector to the posi-
tion or “1” or ”2”.
• Turn the thermostat clockwise to a
higher setting until the heater restarts.