Filter
Top Products
Dehumidifier
5
How to dehumidify
How to dehumidify (DEC12 with humidistat only)
1) Plug the appliance into a mains socket.
2) Check that the “tank full/tank missing” light is off; if not,
place the tank in the correct position.
3) The humidistat knob is used to adjust the humidity level as
desired (MIN/MED/MAX)
To easily select the right humidity level, we suggest you operate as follows:
Turn the humidistat clockwise as far as it will go to the MAX position.
(The dehumidification standby light comes on for the first 3
minutes after which the appliance starts dehumidifying).
Leave the unit on this setting until signs of excess moisture (e.g.
condensation on windows) decrease. This can take several weeks.
At this point slowly turn the humidistat knob anti-clockwise until
the appliance switches off. The dehumidifier will then keep the
humidity at the selected level automatically.
How to dehumidify (DEC16 with humidistat and
function knob)
1) Plug the appliance into a mains socket.
2) Check that the “tank full/tank missing” light is off, if not
place the tank in the correct position.
3) To easily select the right humidity level, we suggest you operate
as follows:
Use the function selector to choose or dehumidifying
(for full explanations of functions see next page).
Turn the humidistat clockwise as far as it will go to the MAX position.
(The dehumidification standby light comes on for the first 3
minutes after which the appliance starts dehumidifying).
Leave the unit on this setting until signs of excess moisture (e.g.
condensation on windows) decrease. This can take several weeks.
At this point select or and slowly turn the humidistat
knob anti-clockwise until the dehumidification light switches off.
The dehumidifier will then keep the humidity at the selected level
automatically.
Dehumidifying standby light
Humidistat
knob
“Tank full / no tank”
indicator light
FUNCTION SELECTOR
HUMIDISTAT KNOB
5748009300 8-08-2002 15:22 Pagina 5