Filter
Top Products
1-2 Cluster SE300 and SL300 Platform Guide
PowerEdge Cluster SE300 and SL300
PowerEdge Clusters SE300 and SL300 support clustering with Windows NT
Server 4.0, Enterprise Edition or Windows 2000 Advanced Server. See the following
sections for information on supported configurations and service packs for your
Windows operating system.
Windows 2000 Advanced Server
Installation instructions for hardware configurations using Windows 2000 Advanced
Server Service Pack 1 (SP1) or later can be found in the Dell PowerEdge Cluster
SE300 and SL300 Installation and Troubleshooting Guide.
Your PowerEdge Cluster SE300 and SL300 system supports the following PowerEdge
servers as cluster nodes in homogeneous pairs (same server) with Windows 2000
Advanced Server SP1 or later:
• PowerEdge 1550
• PowerEdge 2400
• PowerEdge 2450
• PowerEdge 2500
• PowerEdge 2550
• PowerEdge 4400
• PowerEdge 6400
• PowerEdge 6450
• PowerEdge 8450
NOTE: Heterogeneous server clusters (mixed server models) are not supported with
PowerEdge Cluster SE300 and SL300 configurations running Windows 2000
Advanced Server SP1 or later.
Windows NT Server 4.0, Enterprise Edition
Your PowerEdge Clusters SE300 and SL300 support the following PowerEdge
systems as cluster nodes in homogeneous pairs (same server) with Windows NT
Server 4.0, Enterprise Edition:
• PowerEdge 1550
• PowerEdge 2400
• PowerEdge 2450
• PowerEdge 2500
• PowerEdge 2550
• PowerEdge 4400
• PowerEdge 6400
• PowerEdge 6450
• PowerEdge 8450