Filter
Top Products
NOTE: To discover and configure a Storage Center, the software must be installed on a host
server that is located on the same subnet as the storage system
3. Start the software by double-clicking the Enterprise Manager Client shortcut. The Dell Storage Client
welcome screen appears.
• To discover and configure an uninitialized SCv2000/SCv2020 storage system, click the Discover
and Configure Uninitialized SCv2000 Series Storage Centers link and follow the steps in the
wizard.
• To connect to an initialized SCv2000/SCv2020 storage system, click the Log in to a Storage
Center or Data Collector link.
• To set up the host server to access Storage Center and configure Best Practices for performing
IO, click the Setup this host to access a Storage Center link and follow the steps in the wizard.
NOTE: For more information about installing the Dell Storage Client, configuring a storage system,
and performing post-installation tasks, see the Dell Storage Center SCv2000/SCv2020 Storage
System Deployment Guide.
NOM Information (Mexico Only)
The following information is provided on the device described in this document in compliance with the
requirements of the official Mexican standards (NOM):
Importer:
Dell Inc. de México, S.A. de C.V
Paseo de la Reforma 2620-11 ° Piso
Col. Lomas Atlas
11950 México, D.F.
Model number: E09J and E10J
Supply voltage: 100–240 VAC
Frequency: 50/60 Hz
Current consumption: 7.6–3.0 A
Technical Specifications
The technical specifications of the SCv2000/SCv2020 storage systems are displayed in the following
tables.
Drives
SAS hard drives SCv2000: Up to 12 3.5-inch SAS hot-swappable hard drives (6.0 Gbps)
SCv2020: Up to 24 2.5-inch SAS hot-swappable hard drives (6.0 Gbps)
Storage Controllers
Storage controllers Up to two hot-swappable storage controllers with the following IO options:
• Two 16 Gbps Fibre Channel ports
• Four 8 Gbps Fibre Channel ports
• Two 10 Gbps iSCSI ports
• Four 1 Gbps iSCSI ports
• Four 12 Gbps SAS ports
16