Filter
Top Products
Getting Started Guide 41
Unpacking the N30xx Switch
Package Contents
When unpacking each switch, make sure that the following items are
included:
• One Dell Networking switch
• One RJ-45 to DB-9 female cable
• One ReadyRail kit for rack installation, two mounting brackets, bolts, and
cage nuts
• One set of self-adhesive rubber pads for the free-standing switch (four pads
are included)
•One PSU
Unpacking Steps
NOTE: Before unpacking the switch, inspect the container and immediately report
any evidence of damage.
1
Place the container on a clean, flat surface and cut all straps securing the
container.
2
Open the container or remove the container top.
3
Carefully remove the switch from the container and place it on a secure
and clean surface.
4
Remove all packing material.
5
Inspect the product and accessories for damage.