Filter
Top Products
Page 3
Flexible hose - Not supplied.
• Any hose that is used to connect the stove to the gas system shall comply with
SANS 1156-2 or BS 3212.
Temporary installation.
• Flexible hose connection from the gas appliance to the cylinder can be made by the
user. Ensure that pipe clamps are tightened correctly and are of good quality.
Gas cylinder - Not supplied.
• For best results we recommend that gas cylinders with a minimum capacity of 19kg
be used.
Regulator - Not supplied.
• A 2,8 kPa LPG gas regulator which complies with SANS 1237 must be used.
Permanent installation.
• The appliance may only be installed by a Qualified Gas Fitter who is registered with
the LPGSASA. (Liquid Petroleum Gas Association of Southern Africa)
• All registered Gas Fitters are issued with an identity card which carries their
registration number. Make a note of this in the box below.
• The Gas Fitter should also provide you with a written certificate after completion of
the work. Failure to comply with the above will render the warranty invalid.
• Before the installer hands over the installed appliance be sure that you fully
understand:
a) The position of the isolation or shut-off valve in the gas supply line to the appliance.
b) The requirements for safe operation of the appliance.
Note:
• This appliance is supplied ex-factory with jets and air settings for use
with LPG gas only.
• We strongly recommend that the changing of the jets and air flow
adjustment be carried out by a trained Defy technician.
Installer’s details to be filled in below
Safety compliance with local requirements