Filter
Top Products
PAGE 8 OF 12
1. 0 or OFF
2. Bake
3. Pre-Heat
4. Grill
• BAKE is used for baking and roasting.
• PRE-HEAT utilises all the oven elements
to quickly bring the oven up to the selected
temperature. The oven indicator light will
remain on until the selected temperature is
reached. Thereafter the selector must be set
to BAKE. You may use the oven without
PRE-HEAT, it just takes a little longer to
warm up.
• GRILL is used for conventional grilling.
Grilling
• Keep the oven door closed during
grilling.
• Set the selector to grill and the oven
thermostat to the grill position.
• Place the oven shelf on the top shelf
position.
• Place the item to be grilled in a roast pan
on the shelf under the pre-heated grill
element.
0
G
R
I
L
L
P
R
E
-
H
E
A
T
B
A
K
E
OFF POSITION
THE CONTROL PANEL
OVEN INDICATOR LIGHT
OVEN
THERMOSTAT
PLATES
SELECTOR
The Control Panel (520 Model only)
• The oven door may be opened to check on
the grilling process every 5 to 10 minutes
to avoid burning the food.
• The oven control must be turned to the
OFF position when grilling is complete.
Baking
For best baking results, use an aluminium
bake tray (300x230x30mm). These are
available from all Defy Parts Centres Part
number 067609. Teflon coated baking trays
are not recommended.
• Set the selector to pre-heat and set the
oven thermostat to the desired temperature.
• The indicator light will glow and remain
on until the oven has reached the selected
temperature.
• When the indicator light switches off, the
food should be placed in the oven.
• Set the selector to bake.
• During baking the indicator light will
regularly cycle on and off as the oven
thermostat maintains the selected
temperature.
• The door may be opened, for inspection
purposes, after about half the cooking time
has elapsed.
Storage Compartment
• This compartment may be used to store
pots, pans and dishes.
Spiral Plates
• The plate will operate at any setting
between minimum and maximum as
depicted on the control knob. With
experience you will soon find the ideal
position for:
• Gentle simmer to simmer.
• Fast simmer to medium heat.
• Hot to maximum heat.
Note: To switch plate “ON” rotate the dial
knob in a clockwise direction to the required
setting. To switch plate “OFF” rotate the dial
knob in a counter clockwise direction to the
“0” position.
Cleaning spiral plates
• Switch off the electrical supply to the
stove.
• When the plates are cold, lift the hinged
plate up, remove the supports and trims.
• Slide the under-cup out from under the
hob.
THE CONTROL PANEL
OVEN INDICATOR LIGHT PLATE INDICATOR LIGHTS
OVEN
THERMOSTAT
PLATES
SELECTOR
Four Position Selector
• The selector is used to select one of four
oven operating modes.
The Control Panel (521 Model only)