Dayton 3E218D Electric Heater User Manual


 
17
Models 2E510D, 2E511D, 3E218D, and 3E219C
Dayton Operating Instructions and Parts Manual
101421
®
3E218D
Replacement Parts List
Model 3E218D Portable Oil-Fired Heater
(*) Standard hardware item, available locally.
() Not shown.
(†) Not available as an assembly, see pages 14 and 15.
Ref. Part 2E510D 2E511D
No. Description Number Qty. Qty.
Ref. Part 3E218D
No. Description Number Qty.
25 Bushing M50104-03 2
26 Bushing M50104-01 2
27 #10-16x1/2" Screw *M11084-27 6
28 Clip Nut M11271-8 8
29 #8-18x1/2" Screw *M15823-39 1
30 Fuel Tank 098513-21 1
31 Fuel Cap (Includes Gasket) 097702-01 1
32 Flame-out Control HA3003 1
33 Strain Relief Bushing M11143-1 1
34 Power Cord 098219-19 1
35 Side Cover M51077-01AA 1
36 #10-16x1/2" Screw *M11084-27 4
37 Terminal Board 099125-03 1
38 Rivet 099157-01 1
39 Wire Assembly (red, 16") 079010-20 1
40 Wire Assembly (red, 8 1/2") M16841-57 1
41 3/8-27 Hex Nut *099177-01 1
42 Button Plug 099213-01 1
43 Drain Plug (Includes O-ring) M27417 1
44 Wire Assembly M9900-192 1
Thermostat Control (opt.) 2E535 1
Thermostat Control (opt.) 2E817 1
General Information Decal 101685-03 1
Ref. Part 3E218D
No. Description Number Qty.
1 Upper Shell 098511-164 1
2 #10-16x1/2" Screw *100647-01 8
3 Combustion Chamber 098512-31 1
4 Photocell Bracket M16660 1
5 #6-32x3/8" Screw *M10908-2 2
6 Photocell Assembly HA3019 1
7 Burner Assembly
8 #10-16x1/2" Screw *M11084-27 3
9 Fan 097293-01 1
10 Motor and Pump Assembly 1
11 Rubber Bumper M50631 2
12 Motor Mounting Bracket 098138-02 1
13 Solid State Relay 097061-01 1
14 #8-18x1/2" Screw *M15823-39 2
15 Hex Lock Nut NTC-4C 2
16 Fan Guard M51114-01 1
17 Ignitor 102482-01 1
18 #10-16x3/4" Screw *M11084-29 2
19 Fuel Line M51345-01 1
20 Fuel Filter M51150-01 1
21 Fuel Line Tube M51151-01 1
22 Rubber Bushing M10990-3 1
23 Airline M50814-03 1
24 Lower Shell 098511-163 1