Danby DDR3008EE Dehumidifier User Manual


 
4
Electrical Specifications
1. All wiring must comply with local and national
electrical codes and be installed by a qualified
electrician. If you have any questions regarding
the following instructions, contact a qualified
electrician.
2. Check available power supply and resolve any
wiring problems BEFORE installation and opera
-
tion of this unit.
3. For your safety and protection, this unit is
grounded through the power cord plug when
plugged into a matching wall outlet. If you are
not sure whether the wall outlets in your home
are properly grounded, please consult a quali
-
fied electrician. DO NOT USE PLUG ADAPTERS
OR EXTENSION CORDS.
4. The manufacturers nameplate is located on the
rear wall of the water tank compartment. The
nameplate contains electrical and other techni
-
cal data specific to this unit.
5. To avoid the possibility of personal injury, always
disconnect the power supply before attempting
to clean and/or service the unit.
Unit Specifications:
DDR3008EE DDR4588E DDR6588EE
Dehumidifying Capacity
(Pints / Liters)
30/14.2 45/21.3 65/30.7
Electrical Requirements 115 Volts / 60 Hz
Power Input (watts)
490 590 735
Rated Amperage
• Dehumidifying
4.4 5.2 6.5
Air Flow Circulation - High Fan Speed
(Cubic Feet per Minute)
115 121 158
Type of Refrigerant
R22
Water Tank Capacity
(Liters / Pints)
9.9/21
Operating Noise Level
(dB A)
53 53 60
Unit Dimensions Width / Height / Depth
15.0/22.8/13.2
Net Weight (kg / lbs.)
16.5/36.4 17.1/37.7 18.6/41.0
NOTE: Specifications are subject to change without notice, for further improvements.
DANBY_E.indd 4 2007-12-3 13:38:43