Danby DDR2510E Dehumidifier User Manual


 
2
The WARNING instructions issued in this manual are not meant to cover all possible conditions and
situations that may occur. It must be understood that common sense, caution, and carefulness are factors that
cannot be built into all appliances. These factors must be supplied by the person(s) installing, maintaining, or
operating the appliance. Failure to install, maintain, and/or operate the equipment according to the
manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage.
Contact your dealer, service agent, or the manufacturer about any problems or conditions you do not fully
understand.
For Danby Customer Service call 1-800-26- (1-800-263-2629)
To reduce the risk of fire, electric shock, or personal injury, all wiring and grounding
must conform with the latest edition of Local and National Electrical codes.
• It is the customer’s responsibility to have the wiring and fuses checked by a qualified electrician to make
sure adequate electrical power is available.
• This appliance is designed to operate on a separate branch, polarized, three-wire, effectively grounded 120
Volt 60 Hertz (alternating current) circuit protected by a 15 ampere fuse, equivalent fuse or circuit breaker.
The three-prong grounding plug on the power cord should be plugged directly into a polarized, three slot,
effectively grounded receptacle rated 110/120 V.A.C.
FOR YOUR SAFETY: To reduce the risk of fire or explosion, do not store or use gasoline or other
flammable vapors or liquids in the vicinity of this or any other appliance.
Improper connection of the equipment-grounding conductor can result in a risk of
electrical shock. Check with a qualified electrician or serviceman if you are in doubt as
to whether your appliance outlets are properly grounded.
• This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk
of electrical shock by providing a path of least resistance for electrical current. This appliance is equipped
with a cord having an equipment-grounding conductor and 3 prong grounding plug. The plug must be
connected into an outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
• Do not modify the plug provided with this appliance. If it will not fit the outlet, have a proper outlet installed
by a qualified electrician.
• If the household electrical supply does not meet the above specifications, or it you are not sure your home
has an effective ground, have a qualified electrician or your local electrical utility company check it and
correct any problems.
SAVE THESE INSTRUCTIONS!
IMPORTANT SAFETY INFORMATION
NOTE
ELECTRICAL
REQUIREMENTS
GROUNDING
INSTRUCTIONS