Daewoo RC-300 Vacuum Cleaner User Manual


  Open as PDF
of 6
 
66
BEFORE ASKING FOR SERVICE
■ Before Asking for Service, please check each item below if you have trouble with your cleaner.
• Specifications can be changed for improvement without notice.
Problem Check Point Measure
If dust bag is dirty, replace it.
If clogged or blocked, remove the object.
Check if power cord is plugged.
Check if the power switch is turned on.
Pull the power cord out a little and press the cord
rewind button.
Switch off and unplug the cleaner and check the
dust bag, accessories and blockages, then allow
the motor to cool down. The cleaner can be
switched on again after about 30 minutes.
Suction power is weak.
The cleaner does not work.
Power cord does not
rewind.
When the dust bag is full or
blocked or any of the
accessories is blocked, the
over-heating protection for
the motor is activated.
• Dust bag
• Pipe or hose
• Power cord
•
ON/OFF
switch
• Power cord
SPECIFICATIONS
Model
Rating
Watts
Weights(Net)
Dimension (L X H X D)
Cord Length
RC-300
230V/50Hz
1100W MAX.1200W
5.0kg
354 X 240 X 262mm
6m
RC-300(¿ -DESUK) 99.9.23 8:29 PM ˘`6
 previous