Filter
Top Products
3
INDOOR UNIT DISPLAY
■Remote Control Signal Receiver
This place is the part to receive the signal if it
receives the signal, you can hear the signal “beep.
beep”.
■There is a switch panel at inside of Front Panel.
At the time of operating, open the Front Panel.
Emergency switch can be used when the remote
controller is lost or Testing.
Remote switch is usually used by remote controller.
Indoor Unit Display Switch Panel
ON (Red)
Lights when the
operation is going on.
Air clean
(Green)
Timer (Yellow)
Lights during the time
reservation mode.
Quick (Red)
Lights during the
time Quick
Mode.
EMERGENCY
REMOCON
REMOCON
EMERGENCY