Filter
Top Products
12
1.Press the ON/OFF button on the remote control to
turn the unit on; the On LED will
light on the indoor unit and “ON”
will light in the remote display.
2.Press the MODE button to select the
desired mode. Then, set the desired
temperature using the TEMP. ▲ or ▼
buttons.
3.
Press the SLEEP button on the remote controller.
The unit will then be in the sleep mode
and will cool the room to the desired
temperature. After a while the unit will
increase the temperature again.
This process will then repeat.
TO SET UNIT TO SLEEP MODE
When you are going to sleep, select this feature and the unit will cool off the room to the desired temperature and then
increase that temperature throughout the night.
1.Open the indoor unit’s cover and make sure the
EMERGENCY/REMOTE switch is set to the EMER-
GENCY position.
3.
To turn the unit off, slide the
EMERGENCY/ REMOTE
switch to the REMOTE position.
2.The unit will then turn on and depending on the room
temperature, it will select the cool or dehumidifier
mode, fan speed and fan direction automatically.
EMERGENCY OPERATION
If the remote control is lost, broken or has no batteries, follow the procedures below:
EMERGENCY/REMOTE Switch
EMERGENCY/REMOTE Switch
TO CANCEL SLEEP MODE:
To cancel sleep mode, press
the SLEEP button again; the
SLEEP indicator will disappear
in the display.
AUTO
1. The unit is tixed “MILD” mode on production.
2. Press the “TURBO/MILD” button for powerful operation.
After 30 minutes, function returns automatically to “MILD” mode.
3. “TURBO” button does not operate in a “HEAT” mode
4. When press the “TURBO/MILD” button one more time, it will be back to “MILD” mode.
TO SET TURBO/MILD MODE