Daewoo DSB-122LH Air Conditioner User Manual


 
14
2. While the unit is off, press the TIMER
ON button; the display will light waiting
input for the timer, but the actual unit
will not turn on.
3.Repeatedly press the TIMER ON button until the de-
sired hour that you want the unit to turn on appears
on the display. For example, if it is
1:00 P.M. and you want the unit to
turn on at 4:00 P.M., select 3 hours.
4.
Press the ENTER button to input the setting into
memory; the unit will beep, the TIMER indicator will
light on the unit and the TIMER indi-
cator on the remote will light to indi-
cate the unit is in the timer mode.
1.Press the ON/OFF button of timer on the remote control to set the on timer mode, HOUR and ON on the remote
display will be displayed and TIMER will be flicked. When you increase to press ON/OFF you will get desired
time. Then, if pressing ENTER/CANCEL button, ON TIMER Mode will be started. If you want to stop ON TIMER
Mode, please press ENTER/CANCEL again.
TO SET ON TIMER MODE
This unit can be set to automatically turn on after a predetermined amount of hours (up to 24) in the order of 0.5, 1, 1.5,
2, 2.5, 3, 3.5, 4, 5, 6, 8, 10, 12, 16, 20, 24.
5.
Place the remote controller so it is facing the unit.
When the desired hour is reached, the unit will turn on
to the selected mode.
AUTO
NOTE : Press the ENTER button within 5 seconds
of selecting the desired time. If mote than 5 sec-
onds elapse, steps 3 and 4 must be repeated.
1.Press the ON/OFF button of timer on the remote control to set the off timer mode, HOUR and OFF on the re-
mote display will be displayed and TIMER will be flicked. When you increase to press ON/OFF you will get de-
sired time. Then, if pressing ENTER/CANCEL button, OFF TIMER Mode will be started. If you want to stop OFF
TIMER Mode, please press ENTER/CANCEL again.
TO SET OFF TIMER MODE
This unit can be set to automatically turn off after a predetermined amount of hours (up to 12) in the order of 0.5, 1, 1.5,
2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 11, 12.
2.Press the TIMER OFF button once to
enter the Timer screen.
3.Repeatedly press the TIMER OFF button until the de-
sired hour that you want the unit to shut off appears
on the display. For example, if it is
8:00 P.M. and you want the unit to
turn off at 10:00 P.M., select 2 hours.
4.
Press the ENTER button to input the setting into
memory; the unit will beep, the TIMER indicator will
light on the unit and the TIMER indi-
cator on the remote will light to indi-
cate the unit is in the timer mode.
AUTO
5.
Place the remote controller so it is facing the unit.
When the desired hour is reached, the unit will turn
off.
AUTO
NOTE: Press the ENTER button within 5 seconds
of selecting the desired time. If mote than 5 sec-
onds elapse, steps 3 and 4 must be repeated.