Filter
Top Products
Only qualified service personnel shall perform installation and service.
4
Figure 1: Side View of Correct Burner Insertion into Combustion Chamber
6) Reinstall the burner mounting plate, if removed, and push the burner flange
gasket (included with the burner) on to the burner mounting plate threaded studs.
Seat the gasket against the mounting plate.
7) Reusing the fasteners removed in step (4) [three (3), 5/16 in. brass hex nuts and
three (3) steel flat washers], install and secure the burner to the mounting studs
protruding through the burner mounting plate, refer to Figure 2. (For counterflow /
horizontal units, refer to the section of the furnace instruction manual entitled
“Horizontal / Counterflow Furnace Setup”)
Figure 2: Installing and Securing the Oil Burner to the Furnace Mounting Plate