Crimestopper Security Products RS900ER Home Security System User Manual


  Open as PDF
of 8
 
TRANSMITTER PROGRAMMING
TRANSMITTER PROGRAMMING:
Note: All transmitter codes must be learned at time of programming!! The RS900 allows storage of up to 4
different transmitter codes.
1. Open Hood.
2. Turn key to the ON position. (Doors will lock if Autolock is programmed)
3. Press Programming button 4 times, then after a few seconds the unit flash the parking lights 4 times.
4. Press button #1 of the transmitter to be coded. You should get 2 light flashes indicating the unit is waiting for a
2
nd
code, then press button #1 of a second transmitter, the unit will flash 3 times indicating its waiting for the 3
rd
code and 4 flashes for the 4
th
code. If all 4 codes are learned, the unit will automatically exit code learning mode,
otherwise turn key off and close hood.
TRANSMITTER PROGRAMMING:
IGN
OFF
WAIT FOR
4 FLASHES
PRESS 4X's
2, 3, OR 4 FLASHES
START
C
RIME
S
TOPPER
CRIMESTOPPER SECURITY PRODUCTS, INC. 1770 SOUTH TAPO ST. SIMI VALLEY, CA. 93063
RS900III OPS REVA 07.14.00
 previous