Crestron electronic PMK-6X-DSW Indoor Furnishings User Manual


 
Crestron PMK-6X-DSW Pre-Construction Wall Mount Kit for TPS-6X-DSW
Mounted View with Cover Plate (Mounting Example Prior to Drywall Installation)
SCREWS (4)
#06-32 X 1 1/2" PAN,
HEAD (2007254 )
NOTE: MOUNTING PLATE
IS TO BE COVERED WITH
DRYWALL AND THEN
CUTOUT MADE AROUND
THE INSIDE
OF THE
OPENING.
METAL COVER PLATE
(2022825 ) TO COVER DRYWALL
BEFORE TPS-6X-DSW IS
INSTALLED (MAY BE REQUIRED
BY LOCAL BUILDING CODES).
NOTE: BE SURE TO LEAVE
THE FOUR TAPPED HOLES
ON THE FRONT OF THE
PLATE EXPOSED TO ACCEPT
THE MOUNTING SCREWS.
NOTE: The four tapped holes on the front of the mounting plate must be exposed to
accept the TPS-6X-DSW mounting screws. These holes are found beneath the
drywall just outside the four corners of the opening and made by cutting out the
drywall. Refer to the NOTE in “Mounted View with Cover Plate” illustration above.
Installation Guide – DOC. 6778A Pre-Construction Wall Mount Kit for TPS-6X-DSW: PMK-6X-DSW 5