Crane EE-6491 Electric Heater User Manual


 
4
TECHNICAL SPECIFICATIONS
Model Number EE-6491, EE-6491B, EE-6491R, EE-6491GR
Rating Voltage 120 V, 50 Hz
Wattage 1200 W
OPERATION
AND USE
NOTE: It is normal for the heater to emit some odor when it is turned on
for the first time or after having not been used for a long period of time.
This will disappear when the heater has been on a short while.
1. Place the product on a flat,
steady, stable, heat-resistant
surface.
2. Plug the Power Cord into a
standard 120 VAC electrical
outlet.
3. Turn the Heat Select Knob to
either the low heat or the
high heat position.
4. Allow the heater to warm up
until the room temperature
reaches your desired comfort
level.
5. The Indicator Light shows
that the heater is plugged
into a power source.
CAUTION: DO NOT touch grill cover while hot!
SAFETY PROTECTION SYSTEMS
This unit has protection safeguards that shut off the unit when
components become excessively hot or if it tips over.
TIP OVER SWITCH
This heater has a built-in safety feature to automatically turn off the
device when it is tipped over. If the device falls over this function serves
as protection against a dangerous situation.
OVERHEAT PROTECTION
The heater has an internal, over-heating safety device which
automatically switches the heater off if an over-heat situation is detected.
If this should occur, unplug the appliance and wait until the unit cools off.
Once the unit has fully cooled, you can switch it on again.