22 23
FILTER REPLACEMENT METHOD
Filter Replacement Method
Installation and Cleaning
Please replace filter
Filter replacement time is indicated
when the corresponding LED of filter
flickers in window display.
Each of A, B and C respectively represents
Neo-sense filter, Membrane filter(RO),
Fine Post-carbon filter.(
P-07FR/RV
)
Each of A+B, C and D respectively
Represents Plus-sediment filter+ Pre
carbon Filter, Post carbon filter and UF
Membrane filter.
1
2
Close water lead-in valve and pull
out plug.
3
P-07FR/RV P-07FU/UV
P-07FR/RV P-07FU/UV
Remove fitting from filter as shown in diagram.
Replace filters as required. Take caution for
safety at all times.
Initialize filter setting by pressing the
corresponding button(for 3 sec) of filter
among the filter reset
buttons located at
the back of the front
panel.
5
6
�
�
Unfasten screws. Then, hold both side covers
at the bottom and force them upwards as if
pushing up to remove
them from the
main body.
4
�
P-07FR/RV P-07FU/UV