Filter
Top Products
12 13
PLEASE KEEP IN MIND
Please Keep In Mind Preparations
How to Use
The summary for the proper installation of the water filtration system.
1
Wind the teflon tape on the
adaptor and fit it to the pipe.
Then, connect the faucet with
the adaptor.
2
Connect orange tubing with
the connector on the adaptor.
3
Connect the orange colored
inlet tubing for the feed water
with the cold water pipe.
Extend the blue color outlet
tubing to where the drain is.
4
Connect the extraction fitting
to the faucet with a tube.
5
PREPARATIONS
Shall install the adaptor with connector
on the cold water pipe.
Flush water through each filter at
least 5 minutes before connection.
Please check before use
Then, open the feed valve to supply water to the filtration system.
Connect the power to the voltage rating that matches it on
the rating plate.
When the lamp on the
indication parts are turned out
When the lamp on the indication
parts are turned out please check the
reason for break of electric supply in
case of electricity failure or other
conditions.
■
Regular filter change
The regular filter change is very
important to have clean water. The
filter after life is ended may degrade
the performance. Thus, do not miss
the time for the filter change.
■
Check the
Lamps!!
When not using for a long time please lock the main water supply
valve and plug out the power cord.
1
2
5
4
/
Connect it to voltage rating
that matches it on the rating
plate. Then, open the feed
valve to supply water to the
filtration system.
6
Make a hole on the drain pipe
and install the drain clamp
on the hole.
3
Outlet tubing
Inlet tubing