4
Coway
SAFETY INFORMATION
|
Electrical safety
|
Installation safety
INSTRUCTIONS PERTAINNING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
Remove any dust or
water from the power
plug.
If the power cord is
damaged, do not
replace the cord
yourself. Call the Coway
Service Center to have
it replaced.
Installation safety
Do not install the
product near a heating
device.
Do not install the
product in areas
exposed to moisture or
water (rain).
Cold water pipe
Connect the supply
water to the cold water
pipe.
Use tap water
only!!
Use the tap water as the
supply water.
Keep the length
2 m or shorter!
Main water
inlet hose
Keep the length of the
main water inlet hose
from the main water
supply valve to the
product equal to or
shorter than 2 m.
Keep the length
2 m
or shorter
Keep the weak ionized
acidic extraction/
draining hose equal to
or shorter than 2 m.
Do not install the
product on a sloped
oor. Do not apply
force or an impact to
the product.
The ltration device installation shall
comply with applicable state and local
regulations.