Coway CHP-06ER Water System User Manual


 
12 13
WATER FILTRATION PROCESS
NEO-SENSE FILTER
Reduces various foreign bodies that come from the feed water pipe such as dirt, sand, rust
particles, VOCs and chlorine.
MEMBRANE FILTER(RO)
FINE POST-CARBON FILTER
The RO(Reverse Osmosis) Membrane filter reduces Pentavalent Arsenic, Barium, Cadmium,
Mercury, Selenium, Radium 226/228, Trivalent chromium, Hexavalent chromium, Lead,
Nitrate/Nitrite. The influent water to the system shall include the Following characteristics.
No organic solvents Chlorine : < 2 ppm pH : 7-8 Temperature : 41~95 (5 ~ 35 )
Iron : < 2 ppm Turbidity : < 1 NTU Hardness : < 1000 mg/L
It is a composite filter. The post-carbon filter removes odor of water and improve water taste.
And the filter sensor eliminates the dust particles in the post-carbon filter.
Restraints propagation of the microorganism inside water tank and enhances sanitation.
The 6-step water filtering system (CHP-06ER/L)
Disposed
Water
Outlet
NEO-SENSE
FILTER
FINE POST-
CARBON FILTER
MEMBRANE FILTER(RO)
CERAMIC FILTER
Water Filtration Process Please Keep In Mind
CERAMIC FILTER
The disposed water shall be used for cleaning a toilet, a house, dishes, and as
water for sundry uses. However, please do not use it for potable water or
cooking water.
WARNING
How to Use
This system conforms to NSF/ANSI 58 for the reduction of Pentavalent Arsenic,
Barium, Cadmium, Mercury, Selenium, Radium 226/228, Trivalent chromium,
Hexavalent chromium, Lead, Nitrate/Nitrite as verified and substantiated by test data.
PLEASE KEEP IN MIND
The filter is the core technology of the filtration system. If you don’t use qualifying filter
or if you use an old filter that has expired, the system performance may degrade.
/
The summary for the proper installation of the water filtration system
1 Close main water supply valve
to separate the faucet.
2
Wind the teflon tape on the adaptor
and fit it to the pipe.
3 Connect the faucet with the
adaptor.
4 Connect ¼inch orange tubing
with the connector on the
adaptor.
Do not turn the water pipe.
Shall install the adaptor with connector on
the cold water pipe.
Flush water through each filter at least 5
minutes before Connection
5 Connect it to voltage rating
that matches it on the rating
plate. Then, open the feed
valve to supply water to the
filtration system.