Filter
Top Products
17
18
HOW TO USE
How to adjust the pollution sensitivity
※ The unit is set at a standard sensitivity. In case that pollution degree is maintained
at the highest or the lowest level for over 2 hours after the unit starts to work,
please adjust the sensitivity of sensor as the following the way below.
Push both the ‘Auto/Manual’
and ‘Air Flow’ just over 2
seconds.
Step1
The “Pollution” light is out, and the
light stick of indication is on as in
the drawing.
Step2
You can adjust the sensitivity by
pushing ‘Auto/Manual’ button.
stage1:sensible
stage2,3:standard
stage4:insensible
Step3
You can confirm the sensitivity,
which you did, by pushing the ‘Air
Flow’ button.
Step4
�