Filter
Top Products
Installing and Using the Optional Bagging Accessory
The DR LEAF and LAWN VACUUM can utilize nine (9) Bagger Box Inserts in the Commercial model (6 for
the Premier) that fit into the Collector Box for ease of bagging leaves and grass (Figure 6). For proper
bagging operation, you MUST install all boxes in the Collector Box.
BEFORE PERFORMING THIS PROCEDURE, STOP THE BLOWER ENGINE AND DISCONNECT THE SPARK
PLUG WIRE.
Commercial model: (Kit No. 18796)
1. Remove the Rear Panel of the Collector Box by
releasing the six (6) Flexible Latches and lift it off the
pins protruding on the top corners.
Fold Bag Over
Edge of Box
Insert Center Box Last
2. Form the nine (9) individual cardboard leaf bag
holders into boxes and insert a biodegradable leaf bag
or 30 gal. Heavy-Duty trash bag (supplied by the user)
into each box, folding the top of the bag over the top
edge of the box (Figure 6).
9-Individual
Bagger Boxes*
NOTE: Fold down the corners of the Bag Holder to stiffen
the assembly (Figure 7).
3. Place the nine (9) boxes into the Collector Box starting
at the front and working toward the rear.
Tip: Installation is easier if the outside boxes are placed
first in each row, followed by inserting the center box
between them (Figure 6).
*6 for the Premier model
Figure 6
4. Replace the Rear Panel by re-hanging it on the pins
protruding on the top corners and re-hook the six (6)
Flexible Latches.
Inside Bagger Box
Corner Folded Down
Figure 7
CALL TOLL FREE 1-800-DR-OWNER 6