Cooper Lighting P2R Indoor Furnishings User Manual


  Open as PDF
of 3
 
J-box
(by others)
Mounting plate
Canopy
#8-32 x 1/2"
Pan head screws
(x2)
Fixture door
Yoke arms
(x4)
2-way yoke
End cap
3/8-16 x1"
End screw
(x4)
1/4-20 x1"
Aiming screw
(x4)
1/4-20 x4"
Hex bolt
(x2)
Pendant length dependant
on order
Attention:
All extra large fixture require additional bracing/structure around J-box to support fixture.
Exploded View and Part Call-Out
Aiming screw
spacer
(x4)
1.
Loosen both #10-32 x1/2" Pan head screws and allow canopy
to slide down pendant.
2.
Feed power wire from j-box into pendant, ensure wire reaches
electrical cover plate on base of pendant.
3.
Using appropriate fasteners(by others), secure mounting plate
to structure/bracing around J-box.
Securing Pendant to Structure in Ceiling
J-box
(by others)
Mounting plate
Appropriate fasteners
(by others)
Canopy
#10-32 x1/2"
Pan head screws
(x2)
Warning
: Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician.
Do not
mount fixtures vertically.
Installation Instructions
1.
Sheet 1 of 3
Roundel, XL
IN/OUTDOOR
P2R
(Pendant, 2-way, Remote)
Visor and Non-Visor
2.
ADY080868 REV A(ECN080377)
1.
Using all eight 1/4-20 x1" screws, secure yoke arms on both
sides of 2-way yoke.
2.
After securing arms, slide 2-way yoke assembly onto pendant
and secure using both 1/4-20 x 4" hex bolts.
Securing Yoke to Pendant
1/4-20 x1"
socket screw
(x8)
Yoke arms
(x4)
2-way
yoke
1/4-20 x4"
Hex bolts
(x2)
next