Filter
Top Products
Metalux • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
10/06/2008 10:47:32 AM
Specifications and Dimensions subject to change without notice.
ADF060486
ORDERING INFORMATION
PI OPTION ORDER INFORMATION
SHIPPING INFORMATION
SAMPLE NUMBER: MB-132-NB-UNV-EB81-U
Ballast Type
(1)
T5 Systems
EBT
=T5 Linear Electronic Program Rapid
Start. Total Harmonic Distortion < 10%
(5)
EHT =T5 Linear Electronic Program Rapid Start
High Ambient.
Total Harmonic Distortion < 10%
(6)
DIM=Consult Factory
(6)
No. of Ballast
1 or 2
No. of Ballast
1 or 2
Number of Lamps
(Not included)
1=1 Lamp
2=2 Lamps
Lamp Types
54T5=54W T5HO (4') Lamp
Voltage
UNV=Universal 120-277 Voltage
UNC=Universal 347/480 Voltage
(4)
Options
GL=Single Element Fuse
GM=Double Element Fuse
EL=Emergency Installed
(2)
Tandem
Blank=
4' Length
8T=
8' Length
Series
MB= Micro-Bay
Options
PI/CPI=Plug-In (1, 2 or 3)
(see ordering information below)
C3=3' Power Cord
C6=6' Power Cord
PC3-=3' Power Cord & Plug (Specify Voltage)
(3)
PC6-=6' Power Cord & Plug (Specify Voltage)
(3)
Packaging
U=Unit Pack
Reflector
FB=Focus Beam
TB=Task Beam (Medium)
NB=Normal Beam
Accessories (order separately)
GRIPPLE-Y-=Y Mounting Toggle, #2 Cable (Specify 10' or 30')
(Row Mount)
GRIPPLE-TOGGLE-=Single Toggle, #2 Cable (Specify 10' or 30')
(Stand Alone)
MB-EXT-LONG-CONN-KIT-U=Rigid Connector Support for Continuous
Channel Installation
MS=Aisle Coverage Motion Sensor
(3) (6)
MSO=360° Coverage Motion Sensor
(3) (6)
MB-SENSOR-KIT-CTR/MT-U=Aisle Coverage Motion Sensor,
Center Mount Hardware, 120/277V
MB-SENSOR-KIT-END/MT-U=Aisle Coverage Motion Sensor, End
Mount Hardware, 120/277V
MB-SENSOR-KIT-END/480V-U=Aisle Coverage Motion Sensor,
End Mount Hardware, 480V
NOTES:
(1)
Products also available in non-US voltages and frequencies for international markets.
(2)
Voltage to be specified with emergency ballast option.
(3)
Voltage must be specified when ordered with plugs, motion or
emergency ballasts.
(4)
2 lamp ballast configurations only in UNC versions.
(6)
Dimming ballast must be specified at time of order.
Catalog Circuit
Number Number of Wired To
Suffix Circuits Ballast
PI 1 BLK 1 Black
PI 2 BLU 2 Blue
PI 2 BLK 2 Black
PI 3 RED 3 Red
PI 3 BLU 3 Blue
PI 3 BLK 3 Black
BLK=Black Hot
PI1= Single
Circuit
NG= No Ground (ground provided
by fixture body)
WG= With Ground (separate
ground wire in harness)
PI1 - Single Circuit Plug-In
SAMPLE NUMBER: PI1BLK-WG
BLK=Black Hot
BLU=Blue Hot
PI2= Two
Circuit
NG= No Ground
(ground provided by
fixture body)
WG= With Ground
(separate ground wire
in harness)
PI2 - Two Circuit Plug-In
SAMPLE NUMBER: PI2BLK-WG
Leave Blank=Single
Neutral
/WHT=White Neutral
/GRY=Gray Neutral
Leave Blank=Single
Neutral
2NEU=Two Neutrals
BLK=Black Hot
BLU=Blue Hot
RED=Red Hot
PI3= Three
Circuit
NG= No Ground (ground provided
by fixture body)
WG= With Ground (separate
ground wire in harness)
PI3 - Three Circuit Plug-In
SAMPLE NUMBER: PI3BLK-WG
Leave Blank=Single
Neutral
/WHT=White Neutral
/GRY=Gray Neutral
Leave Blank=Single
Neutral
2NEU=Two Neutrals
For complete product data, reference the Fluorescent Specification binder. Specifications & dimen-
sions subject to change without notice. Consult your Cooper Lighting Representative for availabili-
ty and ordering information.
Catalog Numbering System
The PI System is available in sections up to 8' in length for continuous row wiring by simply plugging the sections
together. Each PI section is factory wired to the ballast leads. Color coding of wires is as follows:
PI-1 = One Circuit - 2 Wires: one black, one white
PI-2 = Two Circuits - 3 Wires: one black, one blue, one white
PI-3 = Three Circuits - 4 wires: one black, one blue, one red, one white
When ordering the PI2/PI3 System it is necessary to specify the number of fixtures required for each circuit. Each circuit in
fixture must be ordered as a separate line item, with a different hot wire color specified. All wiring to external feeds, using
cord or cord & plug, are responsibility of installing licensed contractor. Cord and cord & plug sets must be ordered
separately if PI option is chosen.
Catalog No. Wt.
MB-154T5 6 lbs.